Monday, 11 January 2016

Optimarin says stringent UCSG BWT standards must be front for mind for shipowners in 2016

7 January 2016, Norway: As of 1 January 2016 vessels are no longer able to discharge ballast in US waters unless their ballast water treatment (BWT) systems are compliant with stringent demands from the USCG. Experts believe that now, more than ever, it is imperative that shipowners make the right BWT choice.

“There’s so much confusion surrounding the issue of ballast water treatment now,” opines Optimarin CEO Tore Andersen, the head of a firm that brought the first ever commercial BWT system to market back in 2000. “The IMO Ballast Water Management (BWM) convention is close to ratification, but yet to be rubber-stamped, and meanwhile the USCG has taken the bold move to act unilaterally to protect the environment with its own regulations.
“So let’s cut through that uncertainty and state a fact: All shipowners that discharge ballast must get a BWT system, preferably an environmentally friendly one, if they want their ships to operate in the future.
“And, if they want to sail in US waters, then they must act now.”

Two standards, one answer

The fact that there are effectively two sets of regulations regarding BWT standards has muddied the waters for shipowners, making it difficult to find the solution they need.
Classification societies are well aware of this, but aren’t as keen to go on record to explain the situation. An environmental solutions expert at one of the world’s leading classification bureaus agreed to speak, but only on the condition of anonymity.
“Ballast water gets by far the most questions of any issue we deal with,” they note with a smile, “and it’s easy to understand why.
 “There’s a major difference between USCG and IMO regulations. Basically this centres on standards.
“USCG judges (BWT) systems on the basis of ‘living/dead’ organisms in ballast water, whereas IMO views them in terms of ‘viable/unviable’. In other words, for USCG approval systems have to kill the organisms, while for IMO they don’t, but must ensure they don’t reproduce.
“USCG tests this using the FDA/CMFDA method, which uses a dye to identify living organisms, while the IMO does not list one specific methodology. The MPN (Most Probable Number) test is the norm here, having been used for almost 40 years, but procedures vary from laboratory to laboratory. This is an issue for USCG – it wants a simple, reliable and reproducible testing method.
“Until this is established, and there are hurdles in doing so, both with validation and law making, FDA/CMFDA will remain the USCG standard.”

No alternative

Some may now be feeling lost in a sea of abbreviations. So, here’s the lowdown – USCG regulations are much more exacting. Which means fewer systems will make the grade.
For the time being USCG is temporarily accepting the use of Alternate Management System (AMS), whereby vessels with solutions that have already been approved by another flag state can discharge ballast in US waters. However, USCG approved AMS systems will only be accepted for a period of five years after the vessel’s compliance date, and, if they haven’t met the USCG’s own stringent standards by that point, will have to be changed. That burden of potential cost and uncertainty is not one today’s shipowners, operating in a climate of squeezed margins and aggressive competition, may be willing to accept. They need to be sure.
Unfortunately, the systems that many industry observers seem to prefer for their simplicity, ease of operation and environment credentials (utilising no chemicals) are struggling with USCG approval.
“UV systems are easy to operate, don’t require chemical storage and are a good option for the industry,” opines the classification specialist. “But caution is needed.”
They explain that the majority have been made with the ‘viable’ standard in mind and therefore lack the power – “and you might require a lot more power” – to tackle the tougher FDA/CFMDA test.
“That’s where Optimarin has been smart,” they state. “They’re focusing on USCG current requirements and approval. And the first UV system to get this will have a real market advantage.”

The power to deliver

BWT specialist Optimarin - which has sold over 350 of its systems to shipowners across the world, with more than 270 installed - is coming to the end of a USD 3million USCG approval programme.
Its technology is the first UV system to meet the USCG marine water requirements, successfully satisfying the FDA/CFMDA criteria. Further tests of remaining water salinities are scheduled for spring 2016, after which point approval is expected later in the year.
“Passing the initial tests puts us in pole position in the market for final approval and is a great endorsement of our system’s effectiveness,” comments Andersen. “Each of our system lamps has a 35kw capacity. This power instantly kills any potentially harmful invasive organisms and that’s exactly what USCG wants to see.
“We’re delighted to be leading the way in our segment - something that we put down to decades of work, sector expertise and investment.”

With 2016 now upon us, both Andersen and the regulation expert offer similar, sage advice to shipowners.
Andersen notes: “Install a system that is reliable, simple to maintain, easy to install (make sure any supplier can show a history of retrofit success) and proven within the marketplace. This is still a relatively young sector, so it pays to go with a name you can trust.”
His classification peer, meanwhile, has regulations front of mind:
“It’s simple,” they say. “The industry has to comply, so choose a system that will be compliant.”


·         Optimarin installed the world’s first commercial system on the cruise ship Princess Regal in 2000.

·         The type approved Optimarin Ballast System (OBS) is certified by a comprehensive range of classification organisations, including DNV GL, Lloyd’s, Bureau Veritas, MLIT Japan, and American Bureau of Shipping.

·         Shipowners that have chosen the OBS solution include Saga Shipholding, MOL, Grieg Shipping Group, Gulf Offshore, Farstad Shipping, NYK, Nor Line, and Evergreen Marine Corp, amongst others.

·         Optimarin’s OBS, which is already AMS accepted, is the only UV system to have satisfied the USCG’s marine water FDA/CMFDA tests so far. The system is now on course for full USCG approval in 2016.

No comments:

Post a Comment