United Arab Emirates; November 2015 – Bacacier, a
major actor in metallic cladding for buildings in France for 20 years, is the
first manufacturer to propose a major alternative for the traditional metallic
cladding in industrial and commercial areas with no aesthetic and
technical innovation. Bacacier By
Starck, designed by Philippe Starck, one of the greatest designers in the
world, is exhibiting at the Big 5 Show in Dubai (Stand 1C35).
In fact, for 50 years, buildings in the
industrial and commercial areas are built with a magma of metal sheets having
the same shapes. Everything looks the
same. The loss of identity in city suburbs is too obvious. For an architect, creating
a unique building using the available products on the market of metallic
cladding becomes an aesthetic and economic challenge. Bacacier has faced this
challenge creating a new solution with Phillipe Starck, a game where all pieces
can be connected to each others allowing the ultimate customization of the
building.
Basically,
there are new stamped sections. Then a patented fixing system that allows to
accessorize the building without re-drill and without loosing its integrity nor
its thermal performance. Finally, a set of accessories offering endless
finishing possibilities.
UNIQUE
is the master-word of the concept : « with
Bacacier, we imagined an indefinite construction game, a Meccano which will be
an amazing tool for architects » points out Philippe Starck.
Aesthetic and practical, the offer of Bacacier By Starck meets
the traditionnal installation techniques and presents to date the most economic
solution to clad a metallic construction and make it unique, giving it a strong
identity while being « reversible » without major intervention !
In
France, less than 2 years after its release in the market, the 100th building
equipped with the Bacacier By Starck solution has just been installed.
Bacacier
by Starck is presented for the first time at Big Five Show in Dubai, before its
launch in New York in 2016.
باكاسييه تقدم حلا جديدا لإضافة ميزة على المباني
الصناعية
في معرض Big
5 دبي
من ٢٣ إلى ٢٦ نوفمبر ٢٠١٥
الإمارات
العربية المُتحدة – نوفمبر ٢٠١٥ – شركة باكاسييه Bacacier هي لاعب رئيسي في
فرنسا في مجال الكسوة المعدنية للمباني منذ ٢٠ عاما وهي أول من إقترح بديلا جوهريا
للكسوة المعدنية التقليدية في المناطق الصناعية والتجارية حيث لا توجد ابتكارات
جمالية ولا تقنية. تعرض الشركة في Big 5 Show (موقع 1C35) مجموعة Bacacier By Starck التي قام بتصميمها
فيليب ستارك Philippe Starck– أحد أكبر
المصممين في العالم -
في الواقع، شيدت المباني في المناطق الصناعية والتجارية لمدة
٥٠ عاما من صفائح معدنية منصهرة لها نفس الشكل، وتُظهر ضواحي المدينة بدون هوية.
وبالنسبة لمهندس معماري ، تصبح عملية تشييد بناية فريدة باستخدام منتجات الكسوة
المعدنية المتوافرة في السوق تحدياَ من الناحية الجمالية ومن الناحية الاقتصادية.
وقد واجهت الشركة هذا التحدي عن طريق اختراع جديد قامت به مع فيليب ستارك Philippe Starck مثل لعبة يمكن
تركيب جميع أجزائها بعضها البعض مضيفا بذلك ميزة جديدة للمبنى.
هناك في
الأساس ألواح معدنية مطروقة، يليها نظام التثبيت الحاصل علي براءة اختراع والذي
يسمح بإضافة مكملات للمبني دون إعادة ثقبه ودون المساس بسلامته أو بعزله الحراري،
وتأتي أخيراَ مجموعة من الملحقات التي تسمح بإمكانيات للتشطيب لا نهاية لها.
وتُعبّر كلمة "فريدة من نوعها"
عن هذا المفهوم . يوضح فيليب ستارك قائلا "
قمنا مع باكاسييه بتصميم لعبة بناء لا نهائية عبارة عن ميكانو يتحول إلى أداة
مدهشة في أيدي المهندسين المعماريين".
إن عرض Bacacier By Starck به صفة جمالية وله
ناحية عملية كما أنه يطبق تقنيات التركيب
التقليدي ويُقدم اليوم الحل الاقتصادي الأمثل لكسوة بناية معدنية يجعلها فريدة من
نوعها، كما أنه يعطيها هوية قوية ويمكن في نفس الوقت تعديلها دون تدخل كبير!
في فرنسا
، تم الانتهاء من تشييد البناية رقم ١٠٠ التي تستخدم الحل المُقدم من Bacacier By Starck وذلك بعد أقل من
سنتين من طرحه بالسوق.
يُعرض حل
Bacacier By
Starck لأول مرة في Big 5 Show دبي قبل إطلاقه في نيويورك عام ٢٠١٦
نبذة
عن Bacacier